1.0

3.24*

Pressure Gauge 0 – 600 Kg/cm²

3.25*

Slip Gauge Box / *Measuring Pin Box 25 – 100 Pcs

1.1*

0 – 50 mm

3.26*

Temp. Ind./Digital or Thermo couple / PID Controller

1.2*

50 – 150 mm

3.27*

Weigh Bridge up to 200gms.

1.3*

150 – 300 mm

3.28*

Weigh Bridge  above  200 gms to 20Kgs.

1.4*

300 –  500 mm

3.29*

Weigh Bridge  above 20Kgs.to 120Kgs.

1.5

3.30*

Weigh Bridge  above 120 Kgs.to 300 Kgs.

1.5

3.31*

Weights Per Piece/*Feeler Gauge  set

3.32*

Lab Weight box Per set 1mg – 100g

2.1*

Vernier Caliper-(150 mm(6’’)/200mm(8’’)

3.33

Radius/pitch gauge/ Hydrometer

2.2*

Vernier Caliper –(300 mm) 12”

3.34*

Torque Wrench upto 500 Nm

2.3*

Vernier Caliper –(600 mm) 24”

3.35*

Torque Wrench upto 1000 Nm

2.4*

Vernier Caliper –(1000 mm) 40”

Torque Wrench upto 2000 Nm

2.5*

Height Gauge (0 -300 mm)

3.36*

Ammeter/ Voltmeter/ Energy Meter Per Phase

2.6*

Height Gauge (0 – 600mm)

3.37*

OHM Meter /Wattmeter/Frequency Meter – per range

2.7

Height Gauge (0 – 1000mm)

3.38

Vacuum Gauge/ Stop Watch/Timer*

3.0

3.39

Meggar /Rotameter/Flow meter/ H.V. Tester/Earth tester

3.1*

Dial Thickness Gauge / Try Square upto 12”

4.0*

Tachometer/RPM meter

3.2*

Plunger type Dial Indicator – 0.01 mm/10mm

4.1*

Glass Thermometer/ Digital Thermometer

Plunger type Dial Indicator – 0.01 mm/50mm

4.2

Hygrometer/Hydrometer/Humidity meter

3.3*

Plunger type Dial Indicator – 0.001 mm

4.3*

V Block – 4” & 6”

Plunger type Dial Indicator – 0.001 mm/25mm

4.4*

V Block – 8”

3.4*

Puppy Dial – 0.01mm

4.5*

Surface Plate – per sq. Cm.

3.5*

Puppy Dial – 0.002mm

4.6*

Straight Edge per  meter

3.6*

Standard Bar or anvil calibration or anvil setting

4.7*

Comparator Stand / Receiving Gauge-upto 10 dimension

3.7*

Plain Plug Gauge/Snap Gauge/Ring Gauge up to 100 mm

4.8*

Multimeter  3 ½ / Clamp meter 

4.9*

Push Pull Gauge up to 20 Kg

3.8*

Plain Plug Gauge/Snap Gauge/Ring Gauge 100 to 200 mm

4.10

PH meter / LUX meter / Sound level Meter/Shore Hardness Tester/ Water Meter Two Inches/ Oscilloscope

3.9*

Steel Measuring Tape/Scale Up to 2 Meter

4.11

Push Pull Gauge up to 120 Kg

3.10*

Steel Measuring Tape/Scale Up to 5 Meter

4.12*

Spring Balance up to 50 Kg/ Ford Cup /Glass ware

3.11*

Steel Measuring Tape/Scale Up to 30 Meter

4.13

Seaves/Refractro meter/ /Pipette

3.12*

Bore Gauge up to 150 mm

4.14

Coordinate Measuring Machine – 3 axis

3.13*

Bore Gauge 150 – 300 mm

4.15

Vernier caliper/Height Gauge –upto 2 meters

3.14*

Thread Plug Gauge up to 50 mm

4.16

Height Master

3.15*

Taper Thread Plug Gauge up to 50 mm

4.17

Electronic Torque Tester/ Trimos

3.16*

Thread Plug Gauge above 50 to 100 mm

4.18

Coating thickness Gauge/ DFT meter

3.17*

Taper Thread Plug Gauge above 50 to 100 mm

4.19

*Profile Projector / Weld tester/Vibration meter

3.18*

Bevel /angle protector / Combination Set

4.20

Tip force gauge/ MPI testing M/c yoke/Microscope

3.19*

Thread Ring Gauge up to 20 mm

4.21

Welder Qualification per position/welder

3.20*

Thread Ring Gauge above 20 to 50 mm

4.22*

Caliper checker

3.21*

Thread Ring Gauge above 50 to100 mm

4.23*

Muffle furnace/Oven

3.22*

Thread Ring Gauge taper upto 50 mm

4.24

Pressure Gauge 600 – 1000 Kg/cm²

3.23*

Thread Ring Gauge taper 50 to 100 mm

4.25

Dead Weight tester Single range

 Sr. No.

ITEM

1.

SERVICING CHARGES

2.

VERNIER CALLPIER

(INCLUDING JAW REPAIR)

2.(a)

Digital Vernier (Digit Problem)

3.

DIAL/DIGITAL VERNIER CALLPIER

(INCLUDING JAW REPAIR)

4.

Digital Height Gauge (Digit Problem)

5.

VERNIER HEIGHT GAUGE

(INCLUDING OVERHAULING)

6.

DIAL/DIGITAL HEIGHT GAUGE

(INCLUDING OVERHAULING)

7.

DIAL INDICATOR

8.

PUPPY DIAL

9.

BORE GAUGE

10.

V BLOCKS (Grinding)

11.

V BLOCKS (Magnet Charging)

12.

TORQUE WRENCH

13.

DIGITAL MICROMETER (Digit problem)

14.

ELECTRICAL/THERMAL ITEMS

15.